|
Residential Spray Rings (Description):
Let your imagination create a live palette of truly unique aqua artistry. With
a variety of interesting effects possible, OASE's
Residential Spray Rings offer the same tranquility and
soothing class of our Architectural Spray Rings, in a low-cost version for
residential and interior use. This model is also
available in a double ring configuration that provides its own center feed
point.
Spray rings have
been a mainstay of fountain design, usually when coupled with a cascade nozzle
or statuary center piece,
and are the perfect choice to fill a particular pool since they
can be configured to spray from the edge to the center, containing
splash within the pool itself.
Similar to our
Architectural Spray Ring in effect appearance, Residential models are machine
manufactured circular copper
tubes fitted with swaged tube nozzles. Each of these provide a clear
stream jet, offering the homeowner a large, pleasing
display with minimal water consumption. Each swaged tube nozzle is
adjustable via an annealed copper tube stem giving you
the precise aiming necessary for a perfect, exacting appearance.
Further, double ring configurations let you achieve several eye-catching
effects. For example, the inner ring can be aimed
toward the center and the outer ring outward, creating a centerpiece
effect. Or, aim both outward for a two tiered effect, or aim
them both in opposite directions for a spiraling, basket weave
effect. The choices are yours
.
Residential Spray Rings:
Photo1
Photo2
Commercial Spray Rings:
Technical Description:
- Residential Spray
Rings are equipped with swaged in place, annealed copper tube
nozzles, which are adjustable by means of bending.
- The annealed copper
tube nozzles are not replaceable, so these rings are recommended as
a low cost alternative to the Architectural Spray Ring and should be
used in "guarded" locations.
- Residential Spray
Rings are water level independent and can be located in
"dry" areas. Ideally the spray ring is mounted in a pool
or body of water, with the center of the ring at water level
- Residential Spray
Rings are equipped with several inlet ports depending on the size
and model .
-
These ports are female BSPPT threads on the center feed
"Z" versions and male BSPPT threads on the standard
version. All ports should be fed with equal flow and pressure, as
the ring is designed to equalize nozzle pressures only between
feeds.
- Residential Spray
Rings do not include any type of leg or mounting, but can be mounted
directly using the feed plumbing.
- Eight standard sizes
and configurations of Residential Spray Rings are listed here. Since
these are machine fabricated, no
custom sizes are available.
|